Electrotechnical industry
Crates and pallets for the electrical engineering industry:
- They are antistatic, dissipative, or conductive according to the conductivity level.
- They are used in operations where it is required to protect electrostatically sensitive components from the electrostatic discharge.
- Protection must be provided during the production, storage and handling of such components.
- They prevent damage to sensitive electronic components caused by an electrostatic discharge.
- The most effective protection is provided by conductive crates that we offer in the standard sizes of 200x150 mm, 300x200 mm, 400x300 mm, and 600x400 mm.
- All the conductive crates can be equipped with protective dunnage in a conductive or antistatic version.
Product sorting: Code asc.Code desc.Name asc.Name desc.Recommended
Crate RL-KLT 4013 ESD black conductive, no drainage holes, 400x300x213 mm
ESD conductive crates provide perfect protection for various electrotechnical industry products that need to be protected from electrostatic discharge. A flat bottom is designed for lower loads.
Crate RL-KLT 6013 ESD black conductive, no drainage holes, 600x400x213 mm
ESD conductive crates provide perfect protection for various electrotechnical industry products that need to be protected from electrostatic discharge. A flat bottom is designed for lower loads.
Bigbox 1089 B3Y1 grey, 3 skids, closed, lid with 2 straps, UN 11H2/Y
UN box is intended for the transport of solid hazardous substances. It is equipped with three skids and sealed with a lid secured by two straps. UN box is certified by the Belgian Packaging Institute.
Přepravka Blackline 3204.007.992 vodivá 10/4 ohmů, černá, pl. dno
ESD conductive crates provide perfect protection for various electrotechnical industry products that need to be protected from electrostatic discharge. A flat bottom is designed for lower loads.
Přepravka Blackline 6404.007.992 vodivá 10/4 ohmů, černá, pl. dno
ESD conductive crates provide perfect protection for various electrotechnical industry products that need to be protected from electrostatic discharge. A flat bottom is designed for lower loads.